Currency
Removing
 x 
Recently added item(s)

2330 Flyer Tremolo - CAM

Stock replacement parts and options listed on these pages below will fit the 2330 Flyer tremolos only. FYI: If the "angle cut" mounting plate (shown above) has "Flyer" clearly stamped on the saddle bar and mounts with 4 Phillips wood screws, its a 2330 model.

 

Results 1 - 18 of 38

This is the front mounting screw for the Kahler tremolo and fixed bridge systems.

$2.00

This is the Kahler mounting screw for bass tremolos that also doubles as the rear mounting screw for the guitar...

$2.00

If your tremolo says Kahler FLYER, this is the original stock arm it came with.

$19.00

You can use both the Kahler standard or wide tremolo string hooks on any past or current CAM system including the...

$9.00

The Cam Ball Bearing is pressed into the side of the CAM.

$7.00

This is the bearing bolt for all Kahler CAM tremolo systems.

$3.00

The Kahler FLYER intonation and CAM stop bolt is a dual purpose screw.

$3.00

This is a two Kahler spring load lever. It holds a pair of either the 8412 or the 8413 springs in any match up to...

$6.00

It is the pivoting pin for the load lever that adjusts the springs.

$1.00

This is a locking clip for all Kahler cam systems.

$12.00

These standard tension return springs are the correct tension springs for all Kahler 6 string guitar systems. Will also...

$6.00

These heavy tension return springs are the correct tension springs for all Kahler bass tremolo systems. These can also...

$6.00

This is a tension return spring mounting screw.

$1.00

This is the Kahler CAM cage that contains the 6 "top loading" string hooks that the ball end of the string...

$59.00
Options:

This is the pivot pin for the 6 string tremolo hooks that are installed into the CAM cage.

$6.00

You can use both the Kahler standard slot string hook or the wide slot string hooks that suit your needs.

$7.00

This flat top fine tuner knob with a 6/32 thread is for the Kahler Flyer tremolo system or the Kahler 2500 and 2520...

$7.00
Options:

This is a Kahler CAM cage mounting screw.

$2.00