Currency
Removing
 x 
Recently added item(s)

All Bass Tremolos

 

Stock replacement parts and options listed on this page will fit every Kahler bass tremolo whether forward or reverse saddle configuration.

  

Results 1 - 18 of 19

This is the Kahler mounting screw for bass tremolos that also doubles as the rear mounting screw for the guitar...

$2.00

The standard bass arms are 9 inches long and have more leverage than the stock 6 inch Kahler arm which doubles as the...

$29.00
Options:

The XL bass arms are 12 inches long and have more leverage than the 9 inch long Kahler arm.

$29.00
Options:

The Cam Ball Bearing is pressed into the side of the CAM.

$7.00

This is the bearing bolt for all Kahler CAM tremolo systems.

$3.00

The Kahler FLYER intonation and CAM stop bolt is a dual purpose screw.

$3.00

This is a Kahler 3 spring load lever. It holds a trio of either the 8412 or the 8413 springs in any match up to achieve...

$7.00

It is the pivoting pin for the load lever that adjusts the springs.

$1.00

These heavy tension return springs are the correct tension springs for all Kahler bass tremolo systems. These can also...

$6.00

This is a tension return spring mounting screw.

$1.00

This is the Kahler bass saddle for all bass tremolo systems.

$28.00
Options:

This Kahler saddle mounting pin holds 6 guitar tremolo saddles or up to 5 bass saddles on a narrow (N5) bass tremolo...

$7.00

This is a Kahler brass bass tremolo roller.

$7.00

The Kahler pivot set screw locks your bass saddle to the saddle pin after you set up your string spread.

$1.00

This is a Kahler bass saddle clamp plate locking screw.

$1.00

This is the Kahler saddle riser screw. It raises and lowers your bass saddle.

$1.00

This universal set contains all the Allen keys that are used for all the Kahler models.

$7.00

Kahler bass tremolos use the same screws to mount to the body.

$6.00