Currency
Removing
 x 
Recently added item(s)

7300 Hybrid Tremolo - CAM

 

Stock replacement parts and options listed on these pages below will fit the 7300 Hybrid tremolos only. FYI: If the mounting plate (shown at upper right) has Kahler "Hybrid" on the curved back and mounts with 4 Phillips wood screws, its a 7300 model.

 

Results 1 - 18 of 42

This is the front mounting screw for the Kahler tremolo and fixed bridge systems.

$2.00

This is the Kahler mounting screw for bass tremolos that also doubles as the rear mounting screw for the guitar...

$2.00

Standard arms are the arms for all Kahler CAM system guitar tremolos.

$29.00
Options:

The Kahler Heavy Metal arm (HM arm) is based after the Floyd Rose arm.

$29.00
Options:

You can use both the Kahler standard or wide tremolo string hooks on any past or current CAM system including the...

$9.00

This Kahler longer CAM locking screw locks the CAM to the frame and turns the flat mounted Kahler into a fixed bridge.

$4.00

The Cam Ball Bearing is pressed into the side of the CAM.

$7.00

This is the bearing bolt for all Kahler CAM tremolo systems.

$3.00

This is the Kahler arm tension adjustment screw for the arm clutch.

$2.00

The Kahler FLYER intonation and CAM stop bolt is a dual purpose screw.

$3.00

This is a two Kahler spring load lever. It holds a pair of either the 8412 or the 8413 springs in any match up to...

$6.00

It is the pivoting pin for the load lever that adjusts the springs.

$1.00

This is a locking clip for all Kahler CAM guitar and bass tremolo systems.

$12.00

These standard tension return springs are the correct tension springs for all Kahler 6 string guitar systems. Will also...

$6.00

These heavy tension return springs are the correct tension springs for all Kahler bass tremolo systems. These can also...

$6.00

This is a tension return spring mounting screw.

$1.00

This is the Kahler CAM cage that contains the 6 "top loading" string hooks that the ball end of the string...

$59.00
Options:

This is the pivot pin for the 6 string tremolo hooks that are installed into the CAM cage.

$6.00