7200 Hybrid Tremolo - CAM
Stock replacement parts and options listed on these pages below will fit the 7200 X-Trem tremolos only. FYI: Clearly stamped "Hybrid", and the mounting plate (shown at lower right) has 2 hooks along the side, its a 7200 model.
This is the TOM mounting stud for all Kahler stud mounted tremolos.
This is a Kahler Large Stud or Post Insert.
This is a Kahler riser wheel for all stud mounting tremolos.
This is the Kahler riser wheel insert. It is pressed into into the body.
Kahler mounting plate adjustment screw is used to help adjust the intonation forward/back position of the entire stud...
Standard arms are the arms for all Kahler CAM system guitar tremolos.
The Kahler Heavy Metal arm (HM arm) is based after the Floyd Rose arm.
You can use both the Kahler standard or wide tremolo string hooks on any past or current CAM system including the...
This Kahler shorter CAM locking screw locks the CAM to the frame and turns the TOM mounted Kahler into a fixed bridge.
The Cam Ball Bearing is pressed into the side of the CAM.
This is the bearing bolt for all Kahler CAM tremolo systems.
This is the Kahler arm tension adjustment screw for the arm clutch.
The Kahler FLYER intonation and CAM stop bolt is a dual purpose screw.
This is a two Kahler spring load lever. It holds a pair of either the 8412 or the 8413 springs in any match up to...
It is the pivoting pin for the load lever that adjusts the springs.
You use the load lever screw to adjust the Kahler tremolos spring tension.
This is a locking clip for all Kahler CAM guitar and bass tremolo systems.
These standard tension return springs are the correct tension springs for all Kahler 6 string guitar systems. Will also...
These heavy tension return springs are the correct tension springs for all Kahler bass tremolo systems. These can also...
This is a tension return spring mounting screw.
This is the Kahler CAM cage that contains the 6 "top loading" string hooks that the ball end of the string...
This is the pivot pin for the 6 string tremolo hooks that are installed into the CAM cage.
You can use both the Kahler standard slot string hook or the wide slot string hooks that suit your needs.
This is the 6/32 Kahler fine tuner with the dome top for guitar CAM systems.
This is a Kahler CAM cage mounting screw.
This is the brass roller saddle for all Kahler CAM guitar tremolos and fixed bridges.
This is the steel roller saddle for all Kahler CAM guitar tremolos and fixed bridges.
This Kahler saddle mounting pin holds 6 guitar tremolo saddles or up to 5 bass saddles on a narrow (N5) bass tremolo...
This is the teflon roller that can be used for all Kahler CAM guitar tremolos and fixed bridges.
This is the large teflon roller that can be used for all Kahler CAM guitar tremolos and fixed bridges.