Currency
Removing
 x 
Recently added item(s)

2760 Steeler - Fulcrum

Stock replacement parts and options listed on these pages will fit the 2760 Steeler fulcrum tremolos only. Discontinued in 1992, not all parts listed below are available. Only the parts shown below are in stock. FYI: there were 2 different types of arm module used... either the arm hole was actually drilled and tapped into the main block itself on the first version models and later models had an arm module block that was attached to the main block using 2 machine screws (see picture).

Results 1 - 18 of 20

This universal set contains all the Allen keys that are used for all the Kahler models.

$7.00

This is the Kahler fulcrum arm that came stock on several models.

$29.00
Options:

This is the Kahler fulcrum spring claw that you always find in the spring cavity on the back of guitars that use a...

$4.00

These are the proper tension fulcrum springs for Kahler and Schaller tremolos.

$4.00

Turn your fulcrum into a dive only bridge. This Kahler fulcrum tremolo stop fits any guitar that has a back plate to...

$25.00

This is the large shaft fine tuner knob for the 2760 Steeler. This might also be the fine tuner for the 2720 Spyder...

$7.00

This Kahler right hand arm module only works on the 2710 Killer, 2720 Spyder and later versions of the 2760 Steeler. 

$40.00

This Kahler left hand arm module only works on the 2710 Killer, 2720 Spyder and later versions of the 2760 Steeler. 

$40.00

This is a Kahler 2760 Steeler, string lock block.

$6.00

This Auto Latch locking system will turn your Kahler Spyder, Killer or Steeler into a fixed bridge with a twitch of the...

$189.00
Options:

This is a special piece of material called an arm clutch. It is inserted under the arm on the 2760 Steel fulcrum...

$3.00

The arm clutch plug adjusts the arm clutch which is used to stiffen the arm swing for the Kahler 2760 Steeler.

$3.00

These are the arms for the optional Kahler Auto Latch tremolo locking system.

$30.00
Options:

This is the comb style saddle spring for the Kahler 2760 Steeler.

$9.00

This is the Kahler 2760 Steeler intonation screw that tightens the 2760 Steeler saddle to the base plate after you...

$9.00

This is the string lock bolt for the 2760 Steeler.

$9.00

This is the Kahler 2760 Steeler saddle washer.

$1.00

This is a 2760 Steeler post insert.

$10.00