Currency
Removing
 x 
Recently added item(s)

Gibson Super Tune Vibrola

All the parts on this page will fit the Gibson stamped, Kahler 2330 Super-Tune Vibrola system.

Results 1 - 18 of 31

This is the TOM mounting stud for all Kahler stud mounted tremolos.

$10.00
Options:

This is a Kahler Large Stud or Post Insert.

$10.00

This is a Kahler riser wheel for all stud mounting tremolos.

$10.00
Options:

This is the Kahler riser wheel insert. It is pressed into into the body.

$6.00

Kahler mounting plate adjustment screw is used to help adjust the intonation forward/back position of the entire stud...

$1.00

You can use both the Kahler standard or wide tremolo string hooks on any past or current CAM system including the...

$9.00

The Cam Ball Bearing is pressed into the side of the CAM.

$7.00

This is the bearing bolt for all Kahler CAM tremolo systems.

$3.00

The Kahler FLYER intonation and CAM stop bolt is a dual purpose screw.

$3.00

This is a two Kahler spring load lever. It holds a pair of either the 8412 or the 8413 springs in any match up to...

$6.00

It is the pivoting pin for the load lever that adjusts the springs.

$1.00

These standard tension return springs are the correct tension springs for all Kahler 6 string guitar systems. Will also...

$6.00

These heavy tension return springs are the correct tension springs for all Kahler bass tremolo systems. These can also...

$6.00

This is a tension return spring mounting screw.

$1.00

This is the Kahler CAM cage that contains the 6 "top loading" string hooks that the ball end of the string...

$59.00
Options:

This is the pivot pin for the 6 string tremolo hooks that are installed into the CAM cage.

$6.00

You can use both the Kahler standard slot string hook or the wide slot string hooks that suit your needs.

$7.00

This is the 6/32 Kahler fine tuner with the dome top for guitar CAM systems.

$7.00
Options: